Mix and Pour a Clone-A-Pussy Plus+ Silicone Casting Kit
By Homemade Dildo | DIY Penis Clone Kit | Published: 2026-11-05
Category: 사용 방법 가이드
Learn how to mix and pour the Clone-A-Pussy Plus+ Silicone Casting Kit in Medium Tone without bubbles or wasted material, from alginate mold to sleeve assembly.
Quick answer
Mix the silicone parts thoroughly for the full time given in the kit instructions, pour in a slow, thin stream from one spot, and let the cast cure undisturbed before assembling the sleeve. The Medium Tone kit supplies body-safe materials for a vulva replica that becomes a penetrable sleeve.
Why pouring technique matters more than speed
Silicone picks up trapped air easily. A fast, thick pour folds air into the mix, and those bubbles cure in place as pits on the surface of your replica. Pouring slowly from a low height gives bubbles a chance to rise and escape before the material sets.
Work in a room that is not cold. Cool conditions can make the silicone thicker and harder to pour smoothly, so give yourself a comfortable workspace and read the kit's timing notes before you open any packets.
Where the Medium Tone kit fits and where it does not
Medium Tone is one option in the Clone-A-Pussy Plus+ line, alongside other tones and refills. Choose it when you want a mid-range skin tone for the finished sleeve; if you are matching a specific tone, compare the available shades before mixing, because the silicone color is set once it cures.
The kit is designed for home use with body-safe materials, but it does not include a practice mold. If you are new to casting, accept that your first pour may show small imperfections; the sleeve still functions, and the process is repeatable with refills.
Step-by-step: mixing and pouring your kit
- Prepare the workspace and read the timing: Clear a level surface, lay down protection, and read the kit instructions end to end before opening anything. Note the mix, pour, and cure times so you are not rushing mid-step. Set a timer for each stage before you start mixing.
- Mix the silicone thoroughly: Combine the silicone parts and stir slowly and consistently for the full time stated in the instructions, scraping the sides and bottom of the container. Common mistake: stopping early leaves unmixed streaks that never cure properly. Scrape the container walls and bottom as you stir.
- Pour in a slow, thin stream: Hold the container low over the mold and pour steadily from one spot, letting the silicone flow outward. Do not dump the whole batch at once; a thick pour traps air. Keep the stream thin and the container close to the mold.
- Let the cast cure undisturbed: Leave the mold on a level surface for the full cure time in the instructions. Do not poke, lift, or move it early, even if the surface looks set. Common mistake: testing too soon distorts the shape. Resist checking until the full cure time has passed.
- Assemble the sleeve: Once cured, follow the kit instructions to fit the cast into the included case and pleasure sleeve. Check that the replica sits evenly before use. Confirm the cast is fully cured before assembly.
Product facts
- Clone-A-Pussy Plus+ Silicone Casting Kit Medium Tone: The Clone-A-Pussy Plus+ Silicone Casting Kit Medium Tone includes materials to replicate vaginal lips and assemble them with a case and pleasure sleeve into a fully penetrable toy. You get the mold-making and sleeve components in one kit, so your pour becomes a usable toy rather than a stand-alone cast.
Clone-A-Pussy Plus+ Silicone Casting Kit <br> Medium Tone
