Clone-A-Pussy Plus+ Silicone Casting Kit Deep Tone: Step-by-Step
By Homemade Dildo | DIY Penis Clone Kit | Published: 2026-11-02
Category: How-to Guides
Follow these steps to cast a deep-tone vulva replica with the Clone-A-Pussy Plus+ Silicone Casting Kit, from mixing to assembling the sleeve.
Quick answer
Use the Clone-A-Pussy Plus+ Silicone Casting Kit Deep Tone exactly as its instructions direct, working in a clean space and mixing the silicone thoroughly before pouring. The deep tone is pre-matched, so your main job is careful molding and full cure time—not color mixing.
Why the deep tone changes your prep, not your process
The Deep Tone kit removes the guesswork of blending pigments: the silicone is already matched to a deeper skin tone. That means you should not add extra color or substitute materials, because doing so can affect how the silicone sets. Keep the kit contents together and read the enclosed instructions before opening any packets.
Deeper tones can show uneven mixing or trapped air more readily than lighter shades, so slow, thorough stirring and a steady pour matter more than speed. If you are comparing kits, the Clone-A-Pussy Plus+ Silicone Casting Kit Deep Tone is the version to choose when you want that pre-matched shade and the attachable sleeve format in one box.
Where the sleeve fits into the finished cast
This is not a stand-alone mold: the kit includes a case and pleasure sleeve, and you assemble the labia replica with them to create a penetrable toy. Plan your workspace so you have room for the mold, the case, and the sleeve without moving a curing cast. The catalog does not list a separate deep-tone refill or optional insert sizes, so treat the included components as your full build.
Deep Tone casting steps
- Set up a clean, level workspace: Clear a flat surface and lay out the kit contents before opening anything. Keep the deep-tone silicone sealed until you are ready to mix, and protect the surface with a disposable cover. A level surface prevents the mold from tilting and distorting the cast.
- Read the enclosed instructions first: Follow the kit’s own timing and mixing ratios rather than improvising. The Deep Tone kit is pre-matched, so skip any color mixing and use the materials as supplied. Do not substitute or add pigment; the shade is already set.
- Mix the silicone slowly and completely: Stir with a steady, folding motion and scrape the sides and bottom of the container. Stop only when the color and texture look uniform, with no streaks or unmixed patches. Deeper tones reveal streaks, so mix until completely even.
- Pour steadily to avoid trapped air: Pour in a thin, continuous stream rather than dumping the silicone in one spot. Let it flow into the mold details and tap the container gently to release bubbles. A slow pour protects fine labia detail better than a fast one.
- Respect the full cure time: Leave the cast undisturbed for the full cure period given in the instructions. Do not poke, trim, or demold early, even if the surface looks set. Early demolding is the most common cause of tears and misshapen edges.
- Assemble the case and sleeve: Once fully cured, fit the replica into the included case and attach the pleasure sleeve as directed. Check that the sleeve sits evenly before use. A fully cured cast is easier to seat without stretching or cracking.
Kit facts that affect your steps
- Clone-A-Pussy Plus+ Silicone Casting Kit Deep Tone: The Clone-A-Pussy Plus+ Silicone Casting Kit Deep Tone is the original vulva casting kit with an attachable masturbation sleeve. You are building a two-part toy, so leave time to assemble the cast with the case and sleeve after curing.
Clone-A-Pussy Plus+ Silicone Casting Kit <br> Deep Tone - Clone-A-Pussy Plus+ Silicone Casting Kit Deep Tone: The kit uses 100% body-safe materials. Follow the included instructions and avoid adding outside silicone or pigments that could compromise the finished cast.
