How to Make a Clone-A-Willy with Glow Powder: Tips for Best Results

Adding glow powder to your Clone-A-Willy kit is a fun way to create a unique, eye-catching dildo that stands out in your collection. Whether you're using a standard Clone-A-Willy kit or the Plus version with balls, the process is straightforward and rewarding. In this guide, we'll walk you through the steps and share tips for getting the best glow effect.

Glow powder, also known as phosphorescent pigment, absorbs light and re-emits it slowly, creating that magical glow-in-the-dark effect. When mixed correctly with the silicone, it can transform your clone into a glowing masterpiece. Let's dive into the details so you can achieve professional-looking results at home.

Choosing the Right Glow Powder

The first step is selecting a high-quality glow powder. Look for a fine, non-toxic pigment that is safe for skin contact. You can find glow powders in various colors, such as blue, green, and purple. For a classic glow, blue or green are popular choices, but you can also mix colors for a custom effect.

Consider the particle size: finer powders disperse more evenly in the silicone, resulting in a smoother glow. Coarser powders may create a speckled effect, which some people find appealing. Always check that the powder is compatible with silicone and won't affect the curing process.

• Opt for a fine, non-toxic glow powder for even distribution.
• Choose a color that contrasts with your silicone base for a striking effect.

How Much Glow Powder to Use

The amount of glow powder you use will determine the intensity of the glow. As a general rule, use about 1 to 2 teaspoons of glow powder per ounce of silicone. For a standard Clone-A-Willy kit, which typically yields around 8 ounces of silicone, you'll need about 2 to 4 tablespoons. Start with a smaller amount and test a small batch if you're unsure.

Keep in mind that adding too much powder can make the silicone opaque and reduce the glow's brightness, as the powder particles may block light from penetrating. Conversely, too little powder will result in a weak glow. Finding the right balance is key to achieving the best results.

• Start with 1-2 teaspoons per ounce of silicone and adjust as needed.
• Test a small batch first to see the glow intensity before committing to the full mix.

Mixing Glow Powder with the Silicone

When mixing glow powder into the silicone, it's crucial to achieve a homogeneous blend. Begin by mixing the powder with the silicone base before adding the hardener, as this gives you more time to stir thoroughly. Use a slow, steady stirring motion to avoid introducing air bubbles, which can create weak spots in the final product.

For best results, consider using a vacuum degassing chamber to remove bubbles, but if you don't have one, let the mixture sit for a few minutes after stirring to allow bubbles to rise to the surface. You can also gently tap the mold after pouring to release trapped air.

• Mix glow powder with the silicone base before adding the hardener.
• Stir slowly and thoroughly to avoid air bubbles.

Pouring and Curing

Once your glow powder is fully incorporated, pour the mixture into your Clone-A-Willy mold as you normally would. Make sure the mold is stable and level to prevent uneven thickness. Follow the kit's instructions for curing time, which typically ranges from 20 to 30 minutes, but check the specific product guidelines.

After the silicone has cured, carefully remove your glowing creation from the mold. You may need to trim any excess silicone or smooth rough edges with a craft knife. Now, expose your dildo to a bright light source for a few minutes to 'charge' the glow powder, then enjoy the glow in a dark room.

• Ensure the mold is stable and level before pouring.
• Charge the glow by exposing it to bright light for several minutes.

Enhancing the Glow Effect

To get the most impressive glow, use a high-quality glow powder with a long afterglow. Some powders glow for hours, while others fade quickly. For a more intense effect, you can use a higher concentration of powder, but be careful not to compromise the silicone's integrity. Another tip is to use a UV light to charge the glow, as it can be more effective than regular indoor lighting.

If you're using a Clone-A-Willy kit that comes with a glow powder included, like the Glow In The Dark Hot Pink option, you can skip adding extra powder. However, if you want a stronger glow, you can always supplement with additional powder. Just remember to adjust the amount to avoid overdoing it.

• Use a UV light for faster and more intense charging.
• Consider using a kit with pre-mixed glow powder for convenience.

Cleaning and Maintenance

After use, clean your glow-in-the-dark dildo with a toy cleaner or mild soap and water. Avoid using silicone-based lubricants, as they can degrade the silicone. Store your creation in a cool, dry place away from direct sunlight, which can cause the glow powder to degrade over time.

For best results, recharge the glow before each use by exposing it to light. With proper care, your DIY glowing dildo will last for years and provide endless fun.

• Use a gentle toy cleaner like JO H20 Foaming Toy Cleaner Travel Size.



• Store away from direct sunlight to preserve the glow powder.

Making a Clone-A-Willy with glow powder is a simple yet rewarding project. By choosing the right powder, using the correct amount, and mixing thoroughly, you can create a stunning, personalized toy that glows in the dark. Remember to experiment with different colors and amounts to find your perfect glow. Happy crafting!